Water, one of our most precious resources, must be conserved to the best of our ability. Overconsumption of water can quickly result in elevated water bills, which can add up over time. To assist the homeowners of Victoria BC and its surrounding areas in saving money on their water bills, we have compiled a list of five accessible and affordable plumbing solutions.

Man in blue shirt under steel sink fixing the plumbing

Section 1: Fixing Leaky Faucets

A dripping faucet may seem like a small issue, but it can result in a significant waste of water. As per estimates, a single leaky faucet can waste up to 20 gallons of water every day. Fortunately, fixing it is easy. Homeowners can replace the worn-out washer in the faucet. These are the steps to follow:

  • Turn off the water supply.
  • Remove the handle by undoing the screw under it
  • Use pliers to remove the packing nut
  • Remove the stem and washer
  • Fit in the new washer and reassemble the faucet

By fixing a leaky faucet, homeowners can save up to 10% on their water bill annually.

Toilet on a white background

Section 2: Upgrading to Low-Flow Showerheads and Toilets

Low-flow showerheads and toilets reduce water consumption and save you money on your water bill. A low-flow showerhead can cut water usage by up to half, and low-flow toilets use less water per flush than traditional toilets. Here are what homeowners should know about this upgrade:

  • Choose a showerhead with a flow rate of less than 2.5 gallons per minute.
  • Look for a low-flow toilet with a WaterSense label.
  • A low-flow showerhead installation can only take a few minutes.
  • A low-flow toilet can be installed by a professional plumber.

By upgrading to low-flow fixtures, homeowners can save up to 25% on their water bill annually.

Toilet with running water and a pink tiles in the background

Section 3: Fixing Running Toilets

  •  Open the toilet tank and inspect the flapper and chain.
  • Ensure the chain is not tangled and is correctly connected to the flushing handle.
  • If the flapper doesn’t seal correctly, replace it.
  • Homeowners can fix a running toilet with basic tools and little plumbing know-how.

By fixing a running toilet, homeowners can save up to 20% on their water bill annually.

Hand holding faucet aerators for plumbing with a white background

Section 4: Installing Faucet Aerators

A faucet aerator is a device attached to the faucet to reduce water flow without affecting the water’s pressure. It’s a DIY project that can help homeowners reduce water usage. Here are the steps:

  • Remove the existing aerator.
  • Install an aerator with a flow rate of 1.5 gallons per minute or les

By installing a faucet aerator, homeowners can save up to 6% on their water bill annually.

picture of pipes in a wall being worked on

Section 5: Inspecting and Repairing Leaky Pipes

Leaky pipes can cause significant water damage, mold, and high water bills. It’s crucial to inspect pipes regularly to detect any leaks early and repair them right away. Here are the tips to follow:

  • Regular inspection of visible pipes and looking for signs of water damage.
  • Monitoring water usage for significant increases.
  • Repairing leaky pipes can use plumbers’ tape, sealant, or replacing a section of pipe.
  • Hire a professional plumber if the leak is complex or significant.

By fixing leaky pipes, homeowners can save up to 10% on their water bill annually.

Need Plumbing Help?

One of our plumbing professionals would be glad to help!
The water-saving plumbing fixes highlighted above can help homeowners in Victoria, BC, save money while conserving water. The assistance of a professional plumbing service such as RedBlue Heating & Refrigeration can ease the implementation of these fixes. Reducing water bills and conserving water is a collective responsibility that ensures the preservation of our planet’s most precious resource. Start implementing these cost-effective solutions today with RedBlue’s help and start saving on your water bills!
 

Related Posts